FGtech Galletto 4 clone: SE61-G or SE61-GB
From what I can see, there are currently 3 different Chinese PCB versions of Galletto v54 !
- There is one, where there are 2 leds on the top of the galletto and there are two, where the leds are on both sides, where the connectors are located (power/bdm/obd)
OBDEXPRESS.CO.UK, sells two different versions of Galletto v54, from different manufacturers:
(note: on the site, the pictures for both items are the same, but the galletto version differs in the leds and package, please check below for correct details)
- Item No. SE61-G is the other version they sell, it comes in a brown box, has a power adapter for bench work, and has a green led, next to the power connector, and a red and yellow leds on the other side. This version is a little more expensive... Just a couple of euros... Maybe it's because it has the power adapter also...
- Item No. SE61-GB is the one, that has red led next to the power connector, and a green and yellow leds, on the other side, and comes without power adapter and comes in a white box.
This is the version I have, and I have successfully tested it in several cars:
Audi A4 2.0 tdi 2008edc17cp14: dpf delete, eco/power map
have the one with red LED next to power jack. I gave tested on k line works fine, CAN works fine, tricore works fine. Not tested on bdm yet
Tricore 2010 audi a6: read OK
2005 Skoda octavia vrs: K line OK
GP read 1_3 MJT 75 hp: Twenty-six seconds to read. File 2 MB
BMW X6 3.0D 2008 EDC16: OBD read and write WORK
Citroen C3 Bosch EDC 16C34: Read and write all good
5 minutes total to write.
BMW 525 (E39): Read and write OK. Everything Good
BMW edc16c35: failed
then i have to recovery through bdm.